水化硅酸钙粉体补强橡胶的性能

labs

水化硅酸钙粉体补强橡胶的性能
6 [* m" c0 Q7 H+ k: `彭小芹 赵会星 杨巧 高晓元
重庆大学材料科学与工程学院,重庆400045
  P' |  U' ~2 l5 y  ]' H. l
摘　要:动态水热法合成的超细水化硅酸钙粉体，进行表面改性后在炭黑检验配方中完全取代炭黑以用作橡胶的补强填料。对所得复合橡胶进行性能测试，发现掺量为40％，且以160℃、3min为硫化条件时，其硫化胶的拉伸强度、抗撕裂强度与同配方下N220炭黑橡胶基本一致，且扯断延伸率明显增大。结论是低温低压动态水热合成工艺下制备的水化硅酸钙无定型超细粉体，经过改性剂B改性后与天然橡胶所得的复合橡胶强度性能较好，在实验室条件下与中超强N220炭黑补强效果相当。[著者文摘]
1 D9 B0 ^7 f- h# i7 t- G' q8 j
关键词:水化硅酸钙粉体 表面处理 填料 橡胶复合材料 性能
, Q+ Q9 `. i, o* a" D/ t分类号:　TQ330.38[著者标引]文献标识码：A文章编号：1000-7555（2008）08-0090-03栏目信息：结构·性能
相关文献:主题相关
( m! W  {& p4 m6 f. ]4 I
# O1 y2 C" f( f& g/ l7 g% WPerformance of Rubber Filled with Hydrated Calcium Silicate PowderPENG Xiao-qin, ZHAO Hui-xing, YANG Qiao, GAO Xiao-yuan College of Material Science and Engineering, Chongqing University, Chongqing 400045, China Abstract:In order to develop the cheap chromatic filler which can enhance rubber, we compounded natual rubber with hydrated calcium silicate powder which entirely replaces carbon black. Hydrated calcium silicate powder made by the dynamic hydrothermal synthesis technology, After being surfacemodified, with the same percentage entirely substituting carbon black, was used for rubber filler following the carbon black check recipe. By the vulcanized condition at 160℃ and 3 min, the performance of the final composite was tested, The conclusion means that when filler is added by 40 percent（based on polymer）, the tensile and tearing strength of the final composite accords with that of rubber filled with carbon black （N220）, and the final elongation percentage increases evidently after the rubber is ruptured. It can be used in eolorized rubber industry.[著者文摘]

# f3 s. j/ e! D6 MKey words:hydrated calcium silicate powder; surface-modifying; filler; final composite of rubber;performance

' \1 {* N7 R5 c收稿日期:　2007-02-08修订日期:　2007-07-09基金资助:重庆市自然科学基金资助项目（2001-54）
作者简介:联系人：彭小芹，主要从事新型凝胶材料研究，E-mail：pxq01@263．net

MDS

请问楼主该材料价格如何？我现在正需要、关键是价格！供货稳定吗？